RME Audio Multiface Guide de l'utilisateur télécharger pdf (Page 33)

User’s Guide HDSP System Multiface © RME

15.8 Monitor

The Monitor section of the Quick Access Panel is only valid for our Windows MME driver, i.e.

when using programs like WaveLab, Soundforge, Sonar or Samplitude.

Monitor offers two advanced automated monitoring solutions. Monitoring will be controlled

either by special commands directly from the recording software

(Samplitude/Sequoia/SAWStudio, mode ZLM), or by the recording state itself (mode

Mix/Replace).

The basic method used is as simple as it is clever: ZLM and record are controlling the Mute

buttons of the corresponding channels. For this to work, Mute must be activated on the

record's Input channel. The fader must not be set to m.a..

A click on Load Def. will load a template (preset4.mix), which can

be used to verify and test this functionality. But it is also possible to

use any other mixer state, as long as the recording channels are

muted manually.

As soon as a recording starts, the corresponding channels will be

unmuted, i.e. the input signal will be processed according to the

current mixer settings. TotalMix lets you check the whole process

visually, as the Mute buttons in TotalMix will be switched on and off

automatically.

In Mix mode the input signal will be mixed on the outputs when

record is active. In Replace mode the Mute button of the

corresponding playback channel will be activated, so that the input

signal replaces the playback signal.

ZLM is a special function for tape machine style monitoring when

doing punch-ins and outs. For this to work the option 'Hardware

monitoring during punch' has to be activated in

Samplitude/Sequoia. Then at each punch-in the corresponding

Mute buttons will be deactivated, at punch-out they will be re-

activated.

All settings can be changed and configured in real-time.

15.9 Menu Options

Always on Top: When active (checked) the window of TotalMix will always be on top of the

Windows desktop.

Note: This function may result in problems with windows containing help text, as the TotalMix

window will even be on top of those windows, so the help text isn't readable.

Deactivate Screensaver: When active (checked) any activated Windows screensaver will be

disabled temporarily.

Ignore Position: When active, the windows size and position stored in a file or prest will not be

used. The routing will be activated, but the window will not change

ASIO Direct Monitoring: When de-activated any ADM commands will be ignored by TotalMix.

In other words, ASIO Direct Monitoring is globally de-activated.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

RME Audio Multiface Guide de l'utilisateur Page 33