RME Audio ADI-96 PRO Manuel d'utilisateur télécharger pdf (Page 11)

8-Channel, 96kHz AES/EBU / ADAT Converter

Converters

RME‘s ADI-4 DD is a cost eﬃcient AES to ADAT and ADAT to AES

converter. Support for up to 96 kHz and built-in jitter suppression is

just two of several outstanding features. Built into a space saving half

rack enclosure the ADI-4 DD features a lot of the advanced technology

of the ADI-192 DD.

The device essentially consists of two converters: four AES/EBU inputs to

double ADAT outputs, and double ADAT inputs to four AES/EBU outputs.

The double ADAT ports enable full 8 channel support, from 32 kHz up to

96 kHz (S/MUX). The unit provides one XLR I/O directly. A 25-pin D-sub

connector allows for the use of industry standard AES/EBU I/O breakout

cables. Setting an internal connector easily changes the D-sub 25-pin

connector to match the pinout of Tascam (Digidesign), Yamaha and

Euphonix cables. The AES output signal can be set to Professional or

Consumer subcode. Channel 1/2 can also be received and output

optically (TOSLINK).

ADI-2

2-Channel, 192 kHz AD/DA Converter

The ADI-2 is a compact and ﬂexible 2-channel reference-class

AD/DA-converter. It oﬀers AD/DA conversion with up to 192 kHz in

top notch quality. The ADI-2 is remarkably versatile as it is able to

handle digital signals in SPDIF and AES/EBU as well as in the ADAT

format. Key features include balanced inputs and outputs, monitoring

via headphone out, SteadyClock™-controlled converters and 3-stage

hardware controlled input and output levels.

The ADI-2 is equipped with a balanced stereo line input with two Neutrik

XLR combo jacks, a balanced stereo line output with XLR plus separate

TRS jacks in parallel, and an adjustable high-power headphone output.

The volume pot on the front optionally controls not only the front

headphone output, but the rear line outputs as well.

Connectivity

1 x Stereo Analog I/O

1 x ADAT or SPDIF I/O (optical and coaxial,

AES/EBU compatible)

Connectivity

5 x AES/EBU I/O (1 x XLR, 4 x D-sub)

2 x ADAT I/O (optical)

1 x SPDIF (optical, instead 2nd ADAT I/O)

1 x Word Clock I/O

ADI-4 DD

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

RME Audio ADI-96 PRO Manuel d'utilisateur Page 11