RME Audio ADI-642 Spécifications télécharger pdf (Page 20)

BOB-32

Supported Devices

HDSPe AES

HDSP AES-32

Micstasy

DMC-842

ADI-6432

ADI-8 QS

any device with D-sub

connectors in YAMAHA

or TASCAM

pinout format

Universal XLR/SUB-D Breakout Box

RME partner ALVA (www.alva-audio.com) oﬀers several professional cables and useful format converters

(TASCAM <> Yamaha pinout). Please ask your local RME dealer for speciﬁc cables.

D-sub to D-sub cables:

ALVA Part no.: BO25M25M1PRO (1 m)

ALVA Part no.: BO25M25M3PRO (3 m)

ALVA Part no.: BO25M25M6PRO (6 m)

D-sub to 4+4-XLR cables:

ALVA Part no.: BO25MXLR4M4F1PRO (1 m)

ALVA Part no.: BO25MXLR4M4F3PRO (3 m)

ALVA Part no.: BO25MXLR4M4F6PRO (6 m)

HDSP TCO

Supported Cards

all RME HDSPe PCI

Express Cards and

HDSP AES-32

Optional HDSPe synchronization module

Connectivity

1 x Word Clock I/O

1 x Video Sync Input

(alternative to WC In)

1 x LTC I/O

LTC In

ƒ Level range: -25 dBu up to +12 dBu

LTC Out

ƒ Output level: +4 dBu, via Jumper -7 dBu

ƒ Outputs impedance: 220 Ohm

Word Clock In (Video In)

ƒ Not aﬀected by DC-oﬀsets within the network

ƒ Signal Adaptation Circuit: signal refresh through auto-

center and hysteresis, Overvoltage protection

ƒ Level range: 1.0 Vpp - 5.6 Vpp

ƒ Lock Range: 28 kHz - 200 kHz

ƒ Jitter when synced to input signal: < 1 ns

ƒ Jitter suppression: > 30 dB (2,4 kHz)

Word Clock Out

ƒ Max output voltage: 5 Vpp

ƒ Output voltage @ 75 Ohm: 4,0 Vpp

ƒ Outputs impedance: 10 Ohm

ƒ Frequency range: 28 kHz - 52 kHz

Video In (Word Clock In)

ƒ Format: PAL and NTSC

Speciﬁcations

38 BOB-32 39HDSP TCO

PREMIUM LINE

erfect match: The BOB-32 Breakout Box is an advanced solution for interconnecting multichannel

XLRs and D-subs. The box connects 2 x 8 XLR connectors with two 25-pin D-sub connectors, working

basically like two breakout cables. All 16 XLR connectors can be connected to the 19” rack mount unit

instead of a usual multicore breakout cable, preventing cable chaos, errors and connection problems. BOB-32

is pin compatible to the digital TASCAM (=RME) and Yamaha formats. The pinout format can easily be changed

with internal jumpers. Therefore BOB-32 is the perfect partner for the HDSP(e) AES-32 and many other units

having digital audio D-sub I/Os.

Flip-Frame

. The BOB-32 allows to change rack brackets and handles from front to rear and thus to change XLR

or D-sub from front to rear as well. This way a BOB will perfectly ﬁt in every rack and working situation.

Revolutionary new option: Simply fold the case in the middle to arrange both sides to one side.

All connectors appear on front or rear only, as a two height unit within the rack.

Connectivity

8 x XLR Output

8 x XLR Input

2 x D-sub 25-pin

connectors

ime Code Option: The TCO module is an optional extension for selected RME cards. Placed in a free slot

of the computer chassis the TCO will be connected with the HDSPe card via a ﬂat ribbon cable. The small

module adds a Word Clock input to the HDSPe card, and oﬀers a synchronization to LTC and video.

The TCO has a combined switchable Word Clock/Video input (BNC) as well as an LTC input (BNC). The Word Clock

/ Video input can comfortably be terminated (relay-controlled) with a 75 Ohm terminator from the card’s Settings

dialog. The TCO also features an additional LTC output (BNC) with two level settings (conﬁgurable via jumper).

Thanks to SteadyClock, the TCO not only extracts absolute positions from LTC, but also a very clean low-jitter Word

Clock from LTC and video. Thus a sample accurate timecode synchronization to audio or video sources is assured.

LTC can be derived and generated in all common formats, i.e. 24, 25, 30, and 29.97 frames; drop-frame or non-drop-

frame. Commonly used Pull-Up and Pull-Down Formats (+/- 0.1% and +/- 4%) can be utilized, and PAL and NTSC

video formats will be automatically detected and processed.

The received Time Code can be sent to the audio or video application as ASIO Positioning Protocol (APP) or MTC.

An application can send APP or MTC to the TCO, which will generate LTC on hardware level with lowest jitter

(no software/driver routine). Several ﬂy-wheel functions facilitate chase operation (adjustable drop-out length,

Continuous- or Jam-Sync).

dule is an optional exte

nsi

for selected RME cards. Placed in a fre

O will be connected with the HDSPe card via a

ﬂ

at ribbon cable. The s

h HDSP d dﬀ hii LT C did

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Commentaires sur ces manuels

Pas de commentaire

RME Audio ADI-642 Spécifications Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement RME Audio ADI-642