RME Audio Micstasy Guide de l'utilisateur télécharger pdf (Page 21)

User’s Guide Micstasy © RME

Delay Compensation always uses the worst case, the operation of 8 units, but delays the sig-

nals individually. The amount of the respective delay is solely derived from the current ID, no

matter if it has been assigned manually or by Auto ID.

11.4 ID (Id)

Default: 01

Available settings: 01, 02, 03, 04, 05, 06, 07, 08

To remote control more than one Micstasy each device can have its own ID, providing a sepa-

rated remote control of multiple devices via a single MIDI channel.

I64 MADI Card: The ID defines the 8-channel group within the MADI signal that is used to insert

the device's audio data:

ID 01: channels 1-8 ID 02: channels 9-16 ID 03: channels 17-24

ID 04: channels 25-32 ID 05: channels 33-40 ID 06: channels 41-48

ID 07: channels 49-56 ID 08: channels 57-64

When several Micstasy, ADI8-QS or ADI-642 units are connected via MADI, Auto ID normally

takes care of the channel assignment (see chapter 11.2, Auto ID). In special cases, it may be

desirable to set the ID manually, e.g. if the first device in a MADI chain does not support the

Auto ID mode, or if a group of eight channels needs to be routed or processed in a particular

way.

With activated mode Digital Out the ID also defines which MADI input channels are sent to the

ADAT/AES outputs, see chapter 11.11.

Note

: When the device is Auto ID Slave, the displayed ID can not be changed manually.

11.5 Bank (bA)

Default: 01

Available settings: 01, 02, 03, 04, 05, 06, 07, 08

To remote control more than one Micstasy each device can have its own ID, providing a sepa-

rated remote control of multiple devices via a single MIDI channel. Additionally, not only 8 IDs

but 8 banks of 8 IDs each are available.

11.6 Limiter Threshold (LI)

Default: 06

Available settings: 01, 03, 06, 12

Adjusting the threshold for the function AutoSet. Available values are -1, -3, -6 and -12 dBFS.

As soon as the current value is met, AutoSet starts to reduce the Gain. This way a headroom

equalling the threshold value is created, because the level can not be higher than the current

value.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 61 62

Pas de commentaire

RME Audio Micstasy Guide de l'utilisateur Page 21