RME Audio Micstasy Guide de l'utilisateur télécharger pdf (Page 9)

User’s Guide Micstasy © RME

4.2 Quick Start

After connection of all cables and power-on of the device, the configuration of the Micstasy be-

gins in the CLOCK section. Choose a clock source and a sample rate. The next step is the

GAIN setting. This can be done in two ways:

• Individually: Hit the SELECT button of one or several channels. The corresponding GAIN

displays start flashing. Select the desired value with the rotary encoder. Or:

• Globally: Push the encoder knob once. All GAIN displays start flashing. Select the desired

value with the rotary encoder.

The flashing stops automatically after about six seconds. The LEVEL meter serves as comfort-

able tool to check whether gain is sufficient or already overloading the input.

To activate a function, press the SET knob repeatedly until the corresponding LEDs are flash-

ing. Pressing once all GAIN displays start flashing (gain setting), pressing twice selects all

+48V, then PHASE and so on. To activate or deactivate a specific function per channel, the

corresponding SELECT button is used. They are therefore also labelled ON/OFF.

The Micstasy stores all settings before switching off, and sets them automatically when switch-

ing on the next time. The storing process is triggered 4 seconds after the last change, and is

signalled in the Gain display as quickly moving point.

5. Accessories

RME offers several optional components for the Micstasy:

Part Number Description

OK0050 Optical cable, Toslink, 0.5 m (1.7 ft)

OK0100 Optical cable, Toslink, 1 m (3.3 ft)

OK0200 Optical cable, Toslink, 2 m (6.6 ft)

OK0300 Optical cable, Toslink, 3 m (9.9 ft)

OK0500 Optical cable, Toslink, 5 m 16.4 ft)

OK1000 Optical cable, Toslink, 10 m (32.8 ft)

BO25MXLR4M4F1PRO Digital Breakout Cable Pro, AES/EBU

25-pin D-sub to 4 x XLR male + 4 x XLR female, 1m (3.3 ft)

BO25MXLR4M4F3PRO same, 3 m (9.9 ft)

BO25MXLR4M4F6PRO same, 6 m (19.8 ft)

BO25M25M1PRO Digital D-sub cable Pro, AES/EBU

25-pin D-sub to 25-pin D-sub, 1m (3.3 ft)

BO25M25M3PRO same, 3m (9.9 ft)

BO25M25M6PRO same, 6m (19.8 ft)

I64 MADI Card MADI module featuring thru-input, Delay Compensation, Auto ID, MIDI

over MADI, remote via MADI

BOB32 BOB-32, Universal breakout box, 19" 1 Unit height. The professional

digital AES/EBU breakout solution

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Pas de commentaire

RME Audio Micstasy Guide de l'utilisateur Page 9