RME Audio Advanced Remote Control Guide de l'utilisateur télécharger pdf (Page 108)

108

User's Guide Fireface UCX © RME

38.2 Connector Pinouts

TRS jacks of analog input / output

The stereo 1/4" TRS jacks of the analog inputs and outputs are wired according to international

standards:

Tip = + (hot)

Ring = – (cold)

Sleeve = GND

The servo balanced input and output circuitry allows to use monaural TS jacks (unbalanced)

with no loss in level. This is the same as when using a TRS-jack with ring connected to ground.

XLR jacks of analog inputs

The XLR jacks are wired according to international standards:

1 = GND (shield)

2 = + (hot)

3 = - (cold)

TRS Phones jack

The analog monitor outputs on the

front are accessible through stereo

1/4" TRS jacks. This allows a direct

connection of headphones. In case

the output should operate as Line

output, an adapter TRS plug to RCA

phono plugs, or TRS plug to TS plugs

is required.

The pin assignment follows interna-

tional standards. The left channel is

connected to the tip, the right channel

to the ring of the TRS jack/plug.

1 2 ... 103 104 105 106 107 108 109 110 111 112

Pas de commentaire

RME Audio Advanced Remote Control Guide de l'utilisateur Page 108